Function description

Function description

Button 

Button A: Long press to switch ON/OFF, short press to turn ON/OFF the screen. Button B: Touch screen, support full touch screen.

Charging battery
Magnetic charging, as shown below:

Please note that the two contacts of the charging cable cannot contact the conductor at the same time, which will cause the circuit to burn.

Standby dial interface 

1. Slide right to entre menu interface, the menu function is the default smart style, enter the menu function, and slide up/down/left/right to view the menu function icon.
2. Slide down to enter the menu: Bluetooth connection status/Shortcut setting/Battery capacity/Brightness adjustment
3. Slide left to enter the function of Steps/Weather/Heart rate/Sleep recording/Shortcut function.
4. Slide up to enter the information interface.
5. Hold down the standby dial interface to select dials, it will be set successfully after hold down the selection.

Push message
Slide up on the standby interface is the push message interface, and the watch is bound to the app. Under the premise of enabling notification permission, new messages received in the notification bar of the mobile phone will be pushed to the watch. A total of 15 messages can be saved. After the 15 messages are stored, the messages received will overwrite the messages received before.

Slide down to menu

• Icon shows Bluetooth connection status; battery capacity
• Click the first icon to turn ON/OFF the Power saving
• 3 Click the icon function to set the shortcut function (Screen display/Language selection/Vibration intensity/Menu style/QR code,/About)
• Click ‘QR code’, scan it to download the APP
• Click the icon ‘find the phone’ for find phone function (Must be connected with the APP)
• Click the icon to turn on or turn off ‘Do Not Disturb mode’
• Click the icon to adjust the screen brightness

Pedometer
Step counting is enabled by default, the interface displays the current step count of the watch, and the data is cleared at 12 a.m. every day

Sleep monitor
Sleep monitoring time period: 21:00 to 09:00 the next day, the watch generates data. After exiting sleep monitoring, the watch sleep data can be synchronized to the APP after binding the app

Bluetooth music
Android: After the watch is connected to the mobile phone APP, turn on the music player of the mobile phone, you can control the music play / pause, increase and decrease the volume and switch songs on the watch; iOS: The watch is bound to the APP, turn on the mobile music player, the watch can control music playback / pause, increase and decrease the volume, and switch songs.

Sports mode (walking, running, climbing, basketball, badminton)
Select the corresponding sport mode, click the screen, enter the countdown 3, 2, 1 to enter the corresponding sport mode; swipe the screen to the right to jump to the end of the sport interface, click to end the sport and save the data When the distance is greater than 200 meters or the exercise time is greater than 5 minutes, you can save the exercise data; when it is less than this condition, the end of the exercise save will pop up a prompt box: “The data is too little to save” (Various sports data can only be saved in the current interface; after exiting, sports data can only save step data)

Heart rate
Put the watch on the wrist (left hand / right hand) correctly, enter the heart rate menu to measure the heart rate value. The test takes 45 seconds. The heart rate light turned off after 3 seconds after the test is finished.

Blood pressure
Put the watch on the wrist (left hand / right hand) correctly, enter the blood pressure menu, start measuring and obtain a single blood pressure value.

Blood oxygen
Put the watch on the wrist (left hand / right hand) correctly, enter the blood oxygen menu, start measuring and obtain a single blood oxygen value.

Stopwatch
Click the stopwatch to enter the timing interface, click the ‘ Start’ icon to start timing, and click the icon again to pause. Swipe right on the screen to exit, and then enter the stopwatch again. The previous time is cleared and restarted.

Find phone
After the watch is bound to the app, click on the watch to find the phone, and the phone will vibrate or ring to remind.

Sedentary reminder
The switch is off by default. After the app is connected, the app has an on or off function, and the watch function can be turned on or off.

Raise your hand to brighten the screen
The switch is off by default. After connecting to the APP, the ON and OFF functions of the APP can control the function of the watch to turn on and off.

System 

1. Check the Bluetooth name / Bluetooth address / version number of the watch
2. Restore factory settings, click Restore factory settings, the watch will return to the factory state
3. Shut down, after clicking shutdown, the watch will shut down

The screen display contains the following functions

1. Click to switch the dial
2. Long press to enter the dial selection function, slide left and right to select the dial
3. Brightness adjustment, click to adjust the screen brightness
4. Screen duration, click to adjust the screen duration
    
5. The duration of the bright screen when raising your hand, click to adjust the duration of the bright screen for the function.

Language selection

Click to switch watch language

Menu style
Click to select the menu style

QR code
Scan the QR code to download APP

Vibrating
Click to adjust the vibration intensity Binding the app

APP Download method
Scan QR code download

Android system:
App store, Pea pod, Google play and other app stores search ‘FitcloudPro’ to download

Read more: https://manuals.plus/wegi/t500-smart-watch-manual#ixzz7qcUJ3XNR